Quickly raise spa water hardness, and prevent foaming and equipment corrosion.  Increases spa water hardness & hot tub water hardness to prevent corrosion.  Compatible with chlorine, bromine, ozone and biguanide sanitizers, Instructions: One ounce raises the calcium hardness 7 ppm in 500 gallons of water.  Determine amount of product to be added. The ideal hardness level is 150-400 ppm.  Turn jets ON to circulate spa water.  Pour required amount into the water.  Run filter for 1 to 2 hours.  Retest water to ensure proper level.  Repeat steps 1-5 until proper level is obtained.

Concentrated formula quickly neutralizes metals in your spa to prevent unsightly stains!  Prevents iron and other metals from building up & causing spa stains or hot tub stains.  Only one application of this convenient spa chemical is required after each refill.  Compatible with chlorine, bromine and biguanide sanitizers.  Follow up with Defender for prevention of metal build-up, Instructions:  Turn off ALL equipment.  Pour entire bottle contents evenly around spa edge.  Run filter for at least 30 minutes.

Easy to use granular formula quickly raises alkalinity levels!  Effectively raises alkalinity levels which might otherwise cause equipment corrosion.  Balance spa alkalinity & hot tub alkalinity to prevent pH bounce & other spa water problems.  Compatible with chlorine, bromine, ozone and biguanide sanitizers.  Start-Up Instructions:  Add 1 oz (2 tbsp) to spa water.  Allow water to circulate for 30 minutes.  Retest water and repeat Steps 1 and 2 until the desired level is reached.

Prevent buildup in spa plumbing that could restrict water flow, damage spa equipment & cause spa water maintenance problems.  Often, if a spa or jetted tub has problems, the cause is a buildup of organics, oils, dirt and minerals inside the spa plumbing.  Jet Clean is a revolutionary low foaming formula that quickly clears the inside of spa plumbing.  Use each time a spa or hot tub is drained and refilled to keep jets performing like new.  Compatible with all spas, hot tubs and jetted tubs.

A MUST FOR FRESH FILLS OR TOP-OFFS!
Helps eliminate iron, copper and manganese and other metallic stains that can occur in spas.  Effectively disperses precipitated metals and other staining agents in spa water.  Can also be used to gradually remove an existing stain!  Dosage: 16 oz. per 500 gallons (maintenance) or 32 oz. per 500 gallons (stain-removal).

HELPS PREVENT CORROSION OF YOUR SPA'S PLUMBING AND HEATER!
Low calcium levels can cause staining on your spa's surface as well as corrosion in spa lines and equipment. When the calcium level of your spa water drops below 200 ppm, just add Calcium Increaser.  Dosage: 1 oz. per 500 gallons.

Non-foaming algaecide kills and prevents all types of algae and slime growth!  Regular use of this powerful spa algaecide not only destroys existing algae, but will also keep new algae from forming.  Highly effective non-foaming spa algaecide is compatible with chlorine, bromine, ozone and biguanide sanitizers.  Initial Treatment:  For visible algae growth or slimy interior surface, add 6-8 oz. per 500 gallons. For heavy algae growth, drain spa and clean prior to treatment.  Maintenance Treatment:  Add 1-2 oz. per 500 gallons every 5-7 days.

Convenient liquid pH increaser offers precise control of the adjustment of the spa or hot tub pH level.  Pre-mixed liquid formula arrives ready to use, & does not require mixing or diluting before adding to the spa or hot tub.  Fast acting liquid formula is easier to use than common granular spa water balancers.  Compatible with bromine, chlorine & biguanide sanitizers, Instructions:  Turn ON air blower or filter system.  Add 1 oz. directly into spa.  Retest water after 30 minutes.  Follow steps 1-3 until pH and total alkalinity are in the range of 7.2-7.8 and 80-120 ppm respectively.

Lower critical spa pH or hot tub pH levels easily, with no mixing & no mess!  Pre-mixed liquid formula arrives ready to use, & does not require mixing or diluting before adding to the spa or hot tub.  Fast acting liquid formula is easier to use than common granular spa water balancers.  Compatible with bromine, chlorine & biguanide sanitizers, Instructions:  Turn ON air blower or filter system.  Add 1 oz. directly into spa.   Retest water after 30 minutes.  Follow steps 1-3 until pH and total alkalinity are in the range of 7.2-7.8 and 80-120 ppm respectively.

Fast-acting spray & rinse formula with NEW color spray indicator for complete coverage.  Blue color spray indicator shows exactly what portion of the cartridge has been sprayed!  Great to use when there isn’t time to properly soak a filter cartridge overnight.  Quickly removes oil, grease and calcium from spa filters and hot tub filters.  Monthly Cleaning Instructions:  Remove cartridge filter element from filter housing and rinse thoroughly with water to remove loose material.  Saturate the filter element with water.  Spray Instant Cartridge Clean over entire surface area for maximum effect.  Let set 3-6 minutes.  Rinse filter COMPLETELY with water and replace filter back into spa. (NOTE: If filter is not completely rinsed, foaming may occur.)  For heavily soiled filters, repeat steps 1-5.

Powerful non-chlorine, liquid shock formulated to break down oils, lotions and other organic materials.  Specifically designed to be used with Leisure Time Free.  Contains 7.5% hydrogen peroxide.  Compatible with the Leisure Time Simple Spa Care specialty line of products.  Start-up Instructions: Boost is added after Control during start-up.  Weekly Instructions: Control is added on a weekly basis and the amount is based on the spa usage.

Use powerful natural enzymes to break down oil, lotion, and organics that cause unsightly scum lines and odors in spa water.  Significantly reduces the need for spa filters maintenance and routine spa cleaning.  Compatible will all types of spa chemicals and hot tub chemicals, and will not interfere with spa filters.  Initial Treatment:  Add 1 oz. per 250 gallons of spa water.  Repeat daily until scum line is gone. Weekly Treatment:  Add 1 oz. per 250 gallons of spa water weekly to avoid buildup at water line.

Concentrated cleaner designed to remove build-up ABOVE the waterline!  Thick consistency clings to the spa surface for deep penetration of scaling and waterline buildup that other spa cleaners cannot remove.  Fast & powerful spa stain & hot tub stain remover.  Specifically designed for use with Leisure Time "Free" system, Instructions:  Apply Cleanse to sponge, cloth or soft-bristled brush.Then apply to surface to be cleaned and wipe.  Rinse surface thoroughly with water.

HELPS PREVENT SCALE FORMATION AND STAINING IN YOUR SPA!
Use Spa Protect as a part of your weekly routine spa maintenance program to keep spa surfaces, plumbing and equipment in excellent condition.  Prevents stains and scaling from iron, copper and manganese.   Dosage: Start Up - 2 oz. Per 500 gallons.  Maintenance - 1 oz per 500 gallons.

Powerful spa clarifier & hot tub clarifier quickly turns cloudy water into crystal clear water!  Specially formulated for hot water treatment.  This spa water clarifier utilizes unique polymer action to neutralize and remove dirt, soap, oily films and suspended particles for clean, fresh water.  Helps spa filters perform at peak efficiency.  Reduces the need for harsh spa bromine and spa shock chemicals by quickly removing dirt particles.  Enjoy your clean & clear spa immediately, no waiting after treatment!  Compatible with chlorine, bromine, ozone and biguanide sanitizers.  Weekly Instructions:  Turn OFF all equipment.  Turn ON air blower or spa jets.  Add Bright & Clear directly to spa. Use 2 oz. for spas up to 800 gallons. Use 4 oz. for spas over 800 gallons.  Allow blower or jets to run a few minutes.  Turn ON filter system until water is bright and clear.

Cleans, restores and protects spa covers from weathering, fading and discoloration.  Specially formulated for long lasting UV protection.  Cleans and shines spa covers and all vinyl surfaces Repels water, dust and dirt.  Monthly Instructions:  Shake gently before using.  Apply liberally to the intended surface.  Let stand for 15-20 minutes to allow penetration.  Wipe excess product off and buff to a high lustre.

REMOVES THE TOUGHEST WATER-LINE BUILD-UP!
Extra-strength all-purpose cleaner and degreaser removes the toughest water-line build-up.  Can be used on spa shells, plastic and metal fittings, spa pillows - almost anything!  Leaves no residue!  Easy to use spray nozzle!

HELPS REMOVE SUSPENDED PARTICLES THAT CAN CLOUD YOUR SPA WATER!
This unique spa clarifier contains a polymeric flocculent that will coagulate and flock suspended particles that can cloud your spa water.  Prevents oil and scum lines.  Safe with all sanitizing systems.  Will not offset chemical balance of your spa water.  Dosage: 4 oz. per 500 gallons weekly, or more often for heavy bather loads.  Non-toxic formula

THE KEY TO PROPER SPA CHEMISTRY!
When the pH drops below 7.2, just add Spa pH Plus.  Corrects acidic water conditions.  Reduces eye irritation by reducing acidity.  Reduces corrosion of spa equipment.  Dosage: 2 Tablespoons per 500 gallons.

THE KEY TO PROPER SPA CHEMISTRY
When the pH level in your spa is 7.8 - 8.0, just add Spa pH Minus to reduce it!  Proper pH levels are critical to maintaining proper water chemistry.  Safer, easier and less corrosive than muriatic acid!  Dosage: 1 Tablespoon per 500 gallons.

CUTS AWAY GREASE, BODY OILS AND SUNTAN LOTION!
Formulated specifically for spa filters!  Improves filter life!  Restores filter efficiency!  Easy to use spray nozzle!

This specially formulated mix of bromide salts becomes a powerful bromine sanitizer when combined with Leisure Time Renew.  Not only is this two-part system completely chlorine-free, but there are no unpleasant side effects typically associated with other non-chlorine sanitizing systems.  A bromide solution for use with Leisure Time's Renew as part of a system for disinfection of water in spas.  100% bromine sanitizer in an easy-to-use liquid form, for fast dissolving immediate results.  Weekly Instructions:  Treat the spa with Metal Gon according to its label directions.  Add Reserve (4 oz./250 gallons of spa water) directly into the spa while circulating the water to assure rapid and thorough distribution.  Add Renew to activate the bromide bank for a bromine residual.

Prevent mineral buildup from occurring, and extend the life of your spa plumbing and equipment!  Prevents scale formation, and aids in the removal of existing scale.  Regular use of Defender will prevent mineral buildup from occurring and causing the spa's heater or equipment to fail.  The perfect follow up to Leisure Time Metal Gon, applied at start-up.  Compatible with all hot tub sanitizing chemicals and spa sanitizing chemicals.  Weekly Instructions:  Add directly to spa. Use 2 oz. for spas up to 800 gallons. Use 4 oz. for spas over 800 gallons.  Run filtration system for one hour, or normal filter cycle.

pH Balance is a unique pH balancing chemical that adjusts the spa pH level to the ideal range of 7.2 - 7.8.  Prevents pH drift, and eliminates the need to adjust pH on an regular basis.  Use each time the spa water is refilled for easy maintenance & properly balanced pH.  One quart treats up to 500 gallons of water.  Not for use in hard water areas, where the calcium reading exceeds 150 ppm.  Instructions:  Adjust pH and total alkalinity of freshly filled spa to proper levels. (pH level: 7.2 - 7.8 ppm, total alkalinity level: 80-120 ppm), Add entire bottle to filled spa while the filter is running.  pH will instantly increase or decrease to a reading between the ideal range of 7.2 to 7.8.

CLEANS, SHINES AND PROTECTS YOUR SPA COVER!
Cleans and deodorizes.  Removes stubborn stains.  Easy to apply.

Fast-dissolving tablets or granular non-chlorine shock treatment works instantly, with only minutes of spa down time!  Rids spa water of residual soaps, deodorants, natural oils and organic materials that can build up in spa water.  When added to spa water, this fast-dissolving non-chlorine shock forms a bromine solution to quickly destroy any microorganisms left behind by bathers.  pH buffered to prevent any fluctuations in the spa or hot tub pH level.  Buffered potassium monopersulfate compound, specially formulated with DuPont Oxone.  The same product as Leisure Time OZ Spa Shock. After each spa use:  Turn on filtration system.  Add 2 ounces of Granular Renew or 3 tablets directly to the spa for each 250 gallons of water.  Run filtration system for 15 minutes with cover off.  Repeat process once a week to help maintain clear, odor-free water.

Keeps foam from reoccurring, longer than other foam removing products!  Non-oily foam suppressant, specifically designed for hot water applications.  Effective in all spas & hot tubs & compatible with all spa chemicals and hot tub chemicals.  Convenient flip-top cap allows you to spray Foam Down directly on the affected area of the spa.  Instructions:  Shake well before using.  Add directly to the foaming area using approximately 1/2 oz. at a time.  Repeat as necessary.

Concentrated formula deep cleans spa filters & hot tub filters to remove dirt, oil, grease and scale.  Works great on spa filter cartridges, spa filter sand or spa DE filters.  Removes oil, grease, dirt and soap.  An overnight soak will assure complete removal of all contaminants including those that may have been deeply set over months of use.  Use every three months to ensure proper filtration and easy spa maintenance.  Instructions:  Remove grids or cartridges from filter.  In a clean, plastic pail, bucket or trash can that contains 8 gallons of water, add contents of FILTER CLEAN. (This is enough solution to clean 110 square feet of filter area.)  Place cartridge or grids upright in solution.  Soak for a minimum of 3 hours. For maximum effectiveness, soak overnight.  Remove filter from solution. Hose off filter with high pressure nozzle and replace.

RID YOUR SPA OF THOSE UNSIGHTLY BUBBLES FAST!
Specially formulated oil-free silicone compound is very effective in eliminating the spa foam.  Foam is typically caused by body oils, soap, shampoo and other residues in spas.  This concentrated formula is completely compatible with all sanitizers.  Use 1 capful (approx. 1 oz.) per 500 gallons, Add with spa circulating

Quickly boost spa bromine & hot tub bromine levels!  Establishes an immediate bromide reserve in your spa.  For use with brominating tablets in hot tubs, Start-Up:  Add 1/2 oz. per 100 gallons of spa water to establish a 30 ppm bromide reserve.  Add bromine tablets to establish a bromine level.  Repeat steps 1-2 each time the spa is drained and refilled.

Fast-dissolving tablets or granular non-chlorine shock treatment works instantly, with only minutes of spa down time!  Rids spa water of residual soaps, deodorants, natural oils and organic materials that can build up in spa water.  When added to spa water, this fast-dissolving non-chlorine shock forms a bromine solution to quickly destroy any microorganisms left behind by bathers.  pH buffered to prevent any fluctuations in the spa or hot tub pH level.  Buffered potassium monopersulfate compound, specially formulated with DuPont Oxone.  The same product as Leisure Time OZ Spa Shock. After each spa use:  Turn on filtration system.  Add 2 ounces of Granular Renew or 3 tablets directly to the spa for each 250 gallons of water.  Run filtration system for 15 minutes with cover off.  Repeat process once a week to help maintain clear, odor-free water.

Spa staining and scale preventing formula for weekly maintenance.  Contains a unique sequestering agent, designed to prevent stain and scale.  Compatible with the Leisure Time Simple Spa Care specialty line of products.  Start-up Instructions: Control must be added first when filling the spa.  Maintenance Instructions: Control is added first during the weekly maintenance program.

POWERFUL NON-CHLORINE SHOCK IS LONG-LASTING AND DISSOLVES COMPLETELY.  Compare to Leisure Time, Bioguard, Guardex, and Sun.  Spa Shock should be used weekly to oxidize organic contaminants, reduce chlorine odor and increase water clarity.  Dosage: 2 oz. (1/4 cup) per 500 gallons weekly, or more often for heavy bather loads. Great for use with mineral stick systems, Active ingredient: Persulphate compound

EPA approved, & specifically formulated for spas & hot tubs.Concentrated granular chlorine effectively sanitizes and disinfects hot water.  Shock your spa after each use to destroy organic bather waste.  Maintains clean, clear & properly sanitized spa & hot tub water.  Provides a reliable and easy-to-use source of concentrated chlorine.  55% available chlorine

100% chlorine and bromine-free sanitizer is virtually odor-free and controls bacteria longer than chlorine or bromine.  This biguanide based sanitizer is easy to use, and safer to handle and store than harsh bromine or chlorine commonly used to sanitize spa or hot tub water.  Gentle on eyes, hair, and skin, and virtually odor-free.  Does not affect spa pH or hot tub pH levels, resulting in reduced chemical use and less routine maintenance!  Compatible with the Leisure Time Simple Spa Care specialty line of products, which consists of Bright & Clear, Enzyme, Foam Down, Spa Up, Spa Down, Defender, EsScents Fragrances, Boost & Control.  Test strips for Free Sanitizer sold separate below.  Start-up Instructions:  Use Free last when setting up your spa and circulate water with jets on high speed for 15 minutes, Test water to make sure Free level is between 30-50 ppm.  Maintenance Instructions:  Add Free on a weekly basis according to label directions to adjust sanitizer level to its proper range.

HELPS ELIMINATE WATER LINE BUILD-UP!
Prevents water foam on a long-term basis rather than temporarily treating it like other defoamers.  The secret ingredient is chitosan, a proven oil remover.  Chitosan works to break down the foam completely, then it flocs it together so it can be easily removed by your filter.  Won't gum up your spa cartridge! Use 2 oz. per 500 gallons

ULTRA-SOFT CLASSICTM ECONO PILLOW FOR MAXIMUM COMFORT & RELAXATION TO YOUR SPA OR BATH!
Heavy-duty pillow is not only extremely soft, but designed and manufactured to be rugged enough for outdoor spa use.  Molded from a closed-cell, vinyl coated foam.  Available in black or grey. Please specify color when ordering.  Dimensions are 6.5 in. x 11 in.

POWERFUL SHOCK DISSOLVES ALMOST IMMEDIATELY UPON CONTACT WITH WATER!
Chlorine based shock is long-lasting and powerful!  Lithium Shock leaves no cloudy residues and is a necessity to help oxidize organic contaminants and increase water clarity.  Dosage: 2 oz. per 500 gallons weekly, or more often for heavy bather loads.   High performance shock, Dissolves quickly

Finally, a solar blanket for your spa!  Enjoy the same benefits of having a solar cover on your pool, in your spa! Our heavy duty covers trap the sun’s energy to easily heat up your spa or hot tub, keeping it warm all day and night! This 15-mil Solar Spa Cover will minimize heat loss, lower heating costs, and reduce chemical use by preventing evaporation. All covers are full squares and you can customize your cover by trimming it to fit any sized spa or hot tub.

Lock in the proper pH level from refill to refill, even in hard water areas!  Fast Dissolving, easy to use granular formula.   Locks in the spa or hot tub pH level until the next refill.  Compatible with chlorine or bromine sanitizers.  Instructions:  Add 1-1/2 lbs. (half the jar) of pH Balance Plus for up to 250 gallons of spa water or the entire 3 lbs. for up to 500 gallons of spa water. Pour directly into spa.  Turn on jets and allow water to circulate for 15 minutes. Temporary cloudiness may occur, but the water will clear quickly once the product is fully dissolved.  Repeat the application each time you refill your spa with fresh water.