Overall length 6-1/2", Great for picking, marking and cleaning a variety of work surfaces, Can be used to remove old gaskets and o-rings during a mechanical repair or to position wires during electrical installations, Each Probe features an extended-length aluminum body with a knurled grip and a hexagonal head to prevent rolling,

   Extra bright LED work light makes working in dark areas easier than ever
   CAT IV 1000V safety rating is safe for allapplications including industrial applications
   Green Power On indicator light tells you thevoltage detector is working properly before use
   Easy to use rear push button design
   Pocket clip allows for easy storageand retrieval from pocket
   Industry leading non-contact voltage detection technology
   Powered by (2) "AAA" Batteries (included)
   Voltage Range: 50 to 1000V AC
   Safety Category Rating: CAT IV 1000V
   AC Volts: 1000
   Scan for AC Electrical: Yes
   Non-Contact Voltage: Yes
   LED Work Light: Yes
   Indication: Audible & Visual
   Switch Type: On/Off

Simply press the 7" long probe tip against the injector body, adjust the sensitivity using the thumb-wheel and the bright LED strobe will flash each time the injector opens and closes, The strobe allows the you to determine if the injector is firing consistently, misfiring or not firing at all, The probe is specifically designed to detect the vibrations emitted when the injector fires.

7" Long Probe, Super Bright LED kV Strobe and Green LED Arc Indicator, Limited Lifetime Warranty, Toll Free Tech Support, Battery Operated

Measure Voltage & Voltage Drop, Dynamic voltage drop testing, Voltage snapshot, Min/Max glitch capture, Power and ground LED indicators, Computer safe, Kit includes: VoltPRO, 4" probe extension, 3" battery adapter and zippered storage case

0 - 80 Amp, Will output waveforms to scopes for current ramping on fuel injectors, also primary ignition and fuel pump current waveforms,

DC/AC amps up to 1000A, DC/AC volts, ohms, continuity, Frequency, duty cycle, Backlit LCD display, Auto Power off and data hold, Carrying case included,

Measures DC / AC 0.001A - 80A, Can measure down to 1 milliamp, Large jaw opening, Expanded mulitmeter functions, Data hold - auto power off - backlit LCD display, With zippered case and 9V battery,

Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools. Battery-powered Hall-effect probe measures 1A to 400 A, 1mV/Amp output guarantees easy reading on your meter, Take accurate current readings without breaking the circuit, Maximum conductor Ø 32 mm, CAT III 600 V safety rating, One year warranty,

   Test lamps, ballasts and pins
   2.5' Fully retractable antenna for extended reach when testing
   Removable antenna adapter
   Includes: Fluorescent lighting tester, soft carry case, antenna adapter, manual and (4) "AA" batteries

1000 Amps

Pressure/Vacuum Module