Lubricates in very tight places such as universal joints and sealed bearings
   Stainless steel 18 gauge × 1-1/2" long needle
   Equipped with standard grease fitting and protective plastic holder
   For hand operated grease guns only

Small Diameter Hydraulic Coupler, Smaller outside diameter

Attaches "with 7/16" UNEF fitting; 1/8" NPT(m) outlet, Working pressure 7500 psi (517 bar), For use with 14.4-volt, 12V, 7.2V and Model 1163 PowerLubers,

90 Deg Grease Coupler

Use for hard to reach fittings

, With Threaded Protective CapAllows access into difficult-to-reach areas, Includes a quick connect coupler to limit grease by pass, Attaches to all 3 and 4 jaw grease guns,

   Fits grease fittings in confined areas, such as lower ball joints
   Special seal and slot in coupler housing provides 90º access
   Fits all standard grease guns — can be used as general purpose grease coupler

Ball check prevents leaks

Adapter with 90 Deg Coupler

For manual or air powered grease guns, 1/8" NPT male thread,

Small Diameter Hydraulic Coupler, Smaller outside diameter

For manual or air powered grease guns, 1/8" NPT male thread,

   Operating PSI: Up to 5,000
   Capacity: 14 oz.

With Extension and Locking Sleeve

Rugged Cast Iron pump head, Jam proof toggle mechanism, Exclusive "Flip over follower", Three way loading,

Design eliminates need to remove "deep dish" wheels for lubrication of tie rod ends and ball joints

Grease Joint Rejuvenator, Pocket Model

For manual or air powered grease guns, 1/8" NPT male thread,

Includes extension nozzle and locking sleeve

30" Hose for Power Luber

With 18" Whip Hose, Rugged Cast Iron pump head, Precision fit / hardened plunger, Jam proof toggle mechanism, Exclusive "Flip over follower", Three way loading,

   Never cross threads again
   Threadless quick connect barrel
   Reload grease twice as fast using Slide Switch to quickly disengage

With 18" Whip Hose, Easy one hand operation, Rugged die cast head, Exclusive "Flip Over Follower", 3-way loading,

Fully automatic, cycles continuous grease flow when the trigger is depressed, High pressure performance with (40:1 ratio) of pressure into the desired fitting., Exclusive air piston design assures self priming, Heavy duty spring for prime retention, 60 to 150 PSI allows the tool to deliver 2400 to 6000 PSI of pressure into the desired fitting,

Most popular fitting in one kit, Quick connect couplers, Includes: Press on 90º angle adapter, straight adapter, 12' hose extension,

Clears hardened grease from fittings and joints, Eliminates the need to disassemble joints or replace fittings, Forces light oil through clogged lubrication points, Includes: Steel drive cylinder, Hardened piston, Safety shield, High-pressure hose for hard-to-access fittings, Spare drive seals, Lincoln's Model 5852 coupler,

With 18" Whip Hose and 6" Rigid Tube, Jam proof handle, Variable stroke / variable pressure design, Develops 7,500 psi working pressure, Exclusive flip over follower for superior seal, 3 way loading,

Swivels a full 360 Deg, Locks at any one of eight 45 Deg positions,

6" extension and hydraulic coupler, High or low pressure for light- or heavy-duty greasing action, Extension swivels 360 Deg for hard-to-reach fittings., Handy three-way loading: cartridge, filler pump or bulk, Max pressure: 7000/4000 psi,

Grease Joint Rejuvenator

Pumps non-corrosive automotive, agricultural and industrial fluids, Removable non-drip spout allows for threaded hose connection, Telescoping pick-up tube for 16- to 55-gallon drums, Three-tier threaded bung fits standard 2" and 1.5" drums and plastic drums utilizing 56 x 4 mm buttress threads,

Cleans and Unclogs Grease Joints, Loosens hardened grease in joints, Lubricates and frees bearings, Opens clogged fittings and joints,

Universal Swivel, 1/2"-27 x 1/4" NPT

Fits 25-50 lb, Includes pump drum cover and 4' delivery hose,

30" high pressure hose with coupler, Fully automatic / Continuous operation, Plated steel barrel with Flip-Overfollower for bulk or cartridge, Reduces lubrication time, Accessible check valve assembly for easy clean out of contaminates,

For both power or hand operated equipment, All Quick Connect Fittings, Press on 90 Degree Lube Tool (5859), Straight Extension (5855), 12 inch Hose Extension (81795), Slide on 90 Degree Coupler (5884), Rubber Tipped Nozzle (83278), Needle Nozzle (82784), 360 Degree Coupler (5849),

   Delivers 10,000 PSI
   Exclusive Dual Piston Design
   Volume mode for normal greasing (Delivers 20% more grease per stroke)
   Boost mode for high pressure demands (Delivers grease up to 10,000 PSI
   Automatic Bleeder
   Deluxe Combination Filler Nipple/Air Bleeder Valve

Use with power grease guns, Includes 6" extension tube, 1/4" Inlet,

For Hydraulic-type grease fittings, Small Outside diameter permits easy contact with recessed fittings, Replaceable hardened steel jaws, Built-in bass check prevents leak and lubricant backup, Inlet 1/8" NPT (f),

Includes One Battery, 6000 PSI, Three way loading, 30" Flex Hose, Custom carrying case,