Minimum Height: 8-1/2"
   Maximum Height: 16-5/8"
   Heat-treated extension screw allows low pick-up height adjustment and maximum lift height
   Built-in by-pass device protects hydraulic system from over pumping damage.
   Unique cross-type forged release valve assures positive control
   A wide, rugged base provides stability and strength.
   Easy accessible pumping system eliminates off-center pumping force for the most efficient operation.

   Minimum Height: 11-1/2"
   Maximum Height: 17"
   Counter-weighted pawl serves as a secure locking device to prevent the load from accidentally disengaging.
   Sturdy, welded steel construction for superior strength.
   One piece, multi-position ductile ratchet bar provides super strength and durability and quick adjustment mechanism that securely locks into desired location.

One Pair

Four legged steel base with pads for stability, Ductile iron support column with ratchet teeth provides multiple height positions.  Self-locking handle and pawl secure column in place, Large saddles with locating lugs provide support. The 6 ton saddle includes a recess for acceptance of a vehicle panel rail.

   Cable Limiter, Keeps Two Wraps Of Cable On The Ratchet Wheel
   Releases Load One Notch At A Time
   12-Foot Pull
   Meets OSHA Specs
   Meets ASME Spec B30.21-1999
   6-Foot Pull
   Makes Tough Projects An Easy, One-Person Job
   One Piece Pulley Wheel, For Longer Cable Life
   Cast Aluminum Ratchet Wheel
   Zinc Plated For Rust Resistance
   Galvanized Aircraft Cable
   Contour Grip
   Drop Forged Steel Safety Hooks

   Minimum Height: 9-1/2""
   Maximum Height: 18-5/8"
   Heat-treated extension screw allows low pick-up height adjustment and maximum lift height
   Built-in by-pass device protects hydraulic system from over pumping damage.
   Unique cross-type forged release valve assures positive control
   A wide, rugged base provides stability and strength.
   Easy accessible pumping system eliminates off-center pumping force for the most efficient operation.

   Minimum Height: 6"
   Maximum Height: 10-5/8"
   Heat-treated extension screw allows low pick-up height adjustment and maximum lift height
   Built-in by-pass device protects hydraulic system from over pumping damage.
   Unique cross-type forged release valve assures positive control
   A wide, rugged base provides stability and strength.
   Easy accessible pumping system eliminates off-center pumping force for the most efficient operation.

   Counter-weighted pawl serves as a secure locking device to prevent the load from accidentally disengaging.
   Sturdy, welded steel construction for superior strength.
   One piece, multi-position ductile ratchet bar provides super strength and durability and quick adjustment mechanism that securely locks into desired location.
   Minimum Height: 15-3/8"
   Maximum Height: 24-1/4"
   Saddle Size: 4-14" x 1-1/2"

   Makes removal of transaxle easy by supporting engine of front wheel drive vehicles
   Support Arm provides three point support for off-center loads
   Includes 1/8" braided steel cables and 14" adjustable hooks
   Capacity: 700lbs.

1500 lb capacity handles most passenger car and small truck engines

   Must For The Off-Roader
   Lightweight For Easy Use
   Low Pick Up, Lifting Nose
   Only 4.5" From The Base
   4" Long Lifting Nose
   Safety Shear Pin



   Drop Forged Safety Hooks
   Thick Steel Construction
   Heat Treated
   Triple Geared

   Innovative design of Swift Lift offers a fast lift for professional performance
   Rack bar quickly raises to desired support point
   Heavy gauge, steel frame helps prevent distortion and twisting
   Counter-weighted pawl locks racket bar securely in place
   Max Height: 24-3/8"
   Min Height 15-3/4"

   Minimum Height: 9-1/2"
   Maximum Height: 18-5/8"
   Heat-treated extension screw allows low pick-up height adjustment and maximum lift height
   Built-in by-pass device protects hydraulic system from over pumping damage.
   Unique cross-type forged release valve assures positive control
   A wide, rugged base provides stability and strength.
   Easy accessible pumping system eliminates off-center pumping force for the most efficient operation.

   Minimum Height: 6-1/2"
   Maximum Height: 11-1/4"
   Heat-treated extension screw allows low pick-up height adjustment and maximum lift height
   Built-in by-pass device protects hydraulic system from over pumping damage.
   Unique cross-type forged release valve assures positive control
   A wide, rugged base provides stability and strength.
   Easy accessible pumping system eliminates off-center pumping force for the most efficient operation.

One Pair

   Minimum Height: 53-5/8"
   Maximum Height 79-1/8"
   Ideal to support the exhaust system, shock absorber and other vehicle components during an under vehicle repair. They are not designed to support the vehicle.
   Fast and safe technology for professional mechanics.
   Heavy duty welded construction with rugged tubular steel.

Rugged construction for support when transferring load, Lightweight, slender design makes handling easy even in close quarters, 12" diameter base provides maximum stability, Quick adjust spin handle with thrust bearing eliminates wear and provides ease of turning under load, Diamond plate saddle grips the load, Weight Capacity 1500lbs., Min. Saddle Height: 55", Max. Saddle Height: 81-1/3", Overall Length: 12", Overall Width: 12", Overall Height: 57-1/2",,

   Minimum Height: 53-5/8"
   Maximum Height 79-1/8"
   Ideal to support the exhaust system, shock absorber and other vehicle components during an under vehicle repair. They are not designed to support the vehicle.
   Fast and safe technology for professional mechanics.
   Heavy duty welded construction with rugged tubular steel.

Lifting height of 54-1/4" to 80-3/4"; saddle measures 5-1/4" x 1-1/4". 11-7/8" dia. Base

Ideal for supporting vehicle components under the vehicle, All steel construction for added strength, Adjustable pin chained to the stand secures the support column at 6 different height positions, Quick adjust spin handle with thrust bearing eliminates wear and provides ease of turning under load, 1-1/4" diameter acme threaded screw has 6-1/4" of travel for fine adjustment, 5/8" thick rubber saddle pad, Wide base design for load stability, Weight Capacity: 4,000lbs (2 Ton), Min. Saddle Height: 55-1/3", Max. Saddle Height: 85-1/4", Overall Length: 18", Overall Width: 23-1/3", Overall Height: 55-1/2", Saddle Size: 3.2" x 3.2", Base Diameter: 28", Screw Extension: 6-1/4",,

   Drop Forged Safety Hooks
   Thick Steel Construction
   Heat Treated
   Triple Geared

1-1/2 Ton Underhoist Stand With Foot Pedal Mechanism

   Minimum Height: 17-1/2"
   Maximum Height: 27-1/4"
   Counter-weighted pawl serves as a secure locking device to prevent the load from accidentally disengaging.
   Sturdy, welded steel construction for superior strength.
   One piece, multi-position ductile ratchet bar provides super strength and durability and quick adjustment mechanism that securely locks into desired location.

   Minimum Height: 67"
   Maximum Height 76"
   Ideal to support the exhaust system, shock absorber and other vehicle components during an under vehicle repair. They are not designed to support the vehicle.
   Fast and safe technology for professional mechanics.
   Heavy duty welded construction with rugged tubular steel.

One Pair

   Thick Steel Construction
   Heat Treated
   Drop Forged Safety Hooks
   Different Chain Lengths Available On Request

Designed for the budget-minded shop owner who still wants the quality of an OTC product, Built from select steel, this jack can stand up to the abuse that jacks are subjected to daily. Yet, its light compact design makes it easy and convenient to use, Jack has a built-in safety overload system that prevents use beyond its rated capacity, With rear swivel casters, maneuvering and positioning this jack is an easy task, Lifting range of 5" to 20"

   Innovative design of Swift Lift offers a fast lift for professional performance
   Rack bar quickly raises to desired support point
   Heavy gauge, steel frame helps prevent distortion and twisting
   Counter-weighted pawl locks racket bar securely in place
   Max Height: 30-1/4"
   Min Height 19-3/4"

Hydraulic lift mechanism with locking pin, Fits tread widths up to 12", Sold individually -- used in pairs

   Min/Max Height: 9.5" to 17.8"
   Air hose can swivel in any direction
   Safety valve prevents over loading
   3 piece long handle for pumping ease

   5-1/2" low, 22" raised height
   Meets ASME/ANSI - PALD safety standards
   No load first pump, lifting point
   Extra heavy-duty welded steel chassis
   Universal joint release valve

Designed for the budget-minded shop owner who still wants the quality of an OTC product, Built from select steel, this jack can stand up to the abuse that jacks are subjected to daily. Yet, its light compact design makes it easy and convenient to use, Jack has a built-in safety overload system that prevents use beyond its rated capacity, With rear swivel casters, maneuvering and positioning these jacks is an easy task, Lifting range of 6" to 23-1/2"

Feature a formed steel frame for strength and long life and rolled base edges that resist sinking into soft ground or asphalt, Height range of 15-1/2" to 24-1/2", Recessed column saddle for acceptance of vehicle panel rail (pinch weld), Dual purpose handle serves as carrying handle and column release, Investment cast rack bar for long life strength, Covered by OTC Lifetime Marathon Warranty

   1100 pounds capacity
   Adjustable range: 57" x 27" width
   Features two hook assemblies for ease of use
   Tubular steel construction for long life
   Rubber padded support legs ensure stability during use
   Includes two 36" chain assemblies

   Thick Steel Construction
   Heat Treated
   Drop Forged Safety Hooks
   Different Chain Lengths Available On Request

   This puller will yank even the most corroded slack adjuster off the S-cam— and do so in just a fraction of the time needed with "heat and beat" methods
   Won't damage components
   Rugged forcing screw and cast steel body
   Works on Rockwell, Haldex, Gunite and Bendix automatic adjusters

Vehicles to 5,000 lbs. Tire widths to 9"

   The Model 5000 is the workhorse of the GoJak auto jack / dolly product line
   A proven and reliable product that can lift and move wheel weights up to 1,250 lbs. (up to 5,000 lbs with four units)
   Capable of lifting tire widths up to 9 inches wide and up to 32 inches tall, the unit accommodates a very large percentage of the passenger cars and small trucks sold today
   Uses a bi-directional linear ratchet for the jack portion and four 4-inch diameter heavy-duty doubleball raceway casters

Four leg steel base and support tube made of heavy schedule pipe for added strength and stability, Height adjustment pin is attached to stand to prevent loss, Low / High: 11.8" / 19.7"

Jack lifting range: 5" to 20", Jack stand base: 8 1/4" x 7 1/2", Height range: 11 5/8" to 17 1/8"

   Magic Lift technology, jack engages load in one to two pumps
   Low height 4", raised 23"
   Built in hydraulic by-pass
   Steel frame construction for added strength
   Wide solid stance for extra stability