Clean top post terminals
   Great for battery cable ends

Ez Red EZR SP101 Battery Hydrometer

Allows for easier connections on Associated-made and most other insulated clamps, MADE IN USA,

   Tests ethylene glycol solutions
   Temperature compensating
   Wide range: +32 DegF to - 60 Deg F
   Fahrenheit and Celsius scales
   Tests Dex-Cool.(Used in late model vehicles.)

Automotive Computer Memory Unit

   Automotive computer memory retaining tools designed to maintain the memory of the on-board vehicle computer (CCU) when the power source (battery) is disconnected
   Use of these tools when changing or interrupting the power source prevents loss of certain drivability codes, keyless entry codes, digital radio setting, cellular phone settings and other memory related functions
   Prevents loss of radio function on anti-theft radio systems
   Use with 9 volt alkaline battery (not included)

   The rubber pads are adhered with a super strong adhesive and countersunk rivets
   Lift batteries from 4½ to 7½ inches wide, including group 65 batteries

Terminal Tool

Ez Red EZR BK720IM Battery Terminal Spreader

   Ideal for use on cars, trucks, SUV's, boats, industrial and farm equipment
   Jaws fit under cable terminal and center screw pushes down on post to pull terminal up
   Durable hardened high carbon jaws open 1/4" to 1-1/8" to fit most battery terminals

   Interface connector between a jump starter and vehicle's OBD II port
   Turns any jump starter with a 12V power port into a memory saver

Lift and Carry Batteries Safely

   Sturdy steel jaws securely hold batteries
   Spring-action handle turns lifting power into battery gripping pressure
   Form-fitting handle provides a solid gripping surface for your hand
   Carrier works on nearly all batteries, from motorcycles to boats
   Saw-tooth jaw tips provide no-slip battery gripping power
   Carrier grips the battery just below the top lip for good balance
   A heavy-duty tool that is built to last

   Overall length 9-3/4"
   Made of high carbon polished heat-treated steel
   Cushion grip will not slip in wet or oily hands
   Ideal for separating wires, removing small fuses, "O" rings, retrieving washers and loose parts too small to pick up with your fingers

   78"
   Use with your 12V Jump Starter to save fault codes and programmed electronic settings

   Prevent the loss of electronic memory when disconnecting the vehicle's battery
   High visibility coiled cord stretches to 8 feet!
   Easy storage in tool box
   OBD2 connection uses positive and ground pins only, will not interfere with fault codes
   Coiled cord prevents tangles
   In line fuse
   Cigarette lighter input. (12 volt power source not included.)

One Tool for Two Jobs.  Dual-use pliers spread battery post clamp and tapered, ribbed tips remove corrosion and build-up from inside the clamp

   8 Gauge
   Heavy-Duty plated coil spring for vise-like gripping
   Color coded clamps for easy polarity identification
   Vinyl coated for rust and corrosion protection (excludes 10 gauge)
   Pressure-crimped connections for low resistance and maximum conductivity
   Clamps designed for top and side terminal batteries
   Convenient storage carton with carry handle
   RoHS Compliant

Internal 100 amp loading capacity, Tests battery voltage, starter current draw, charging voltage and battery condition, Heavy duty cable and copper plated clamps,

   Trickle charges 12V battery
   Works under cloudy conditions
   Environmentally safe and no power needed

   Auto Charging Mode
   50 amp clamp size
   Charging 6 Volt: 1.5
   Amps 12 Volt: 1.5

With 5V USB Outlet

   140 watt continuous output, 280 peak amps
   Single 110V outlet
   Built-in cooling fan
   110V charging for laptops, DVD players and more
   5V charging for phones, cameras, games and more

Solar SO1002  On Board Charger

   6 Gauge
   Heavy-Duty plated coil spring for vise-like gripping
   Color coded clamps for easy polarity identification
   Vinyl coated for rust and corrosion protection (excludes 10 gauge)
   Pressure-crimped connections for low resistance and maximum conductivity
   Clamps designed for top and side terminal batteries
   Convenient storage carton with carry handle
   RoHS Compliant

Pair of Clamps, 100% copper jaws,

   Auto Charging Mode
   Amps 12 Volt: 1.5

4 Gauge

   Tangle free design
   Extra heavy to commercial duty construction
   High/low temperature construction
   Heavy duty jaws
   Parrot clamp

   Delivers a true 125 amp load and is calibrated to test batteries up to 1000 CCA
   It features an easy-to-read color-coded meter and a graduated scale for assessing battery condition.
   It can be used to test 6 and 12 Volt batteries, starting and charging systems
   1 Year Limited Warranty

Fully Automatic, Microprocessor Controlled

   Auto voltage detection
   Reverse hook up protection
   Desulfation and float mode
   For all battery types
   Includes: quick connect harness, 50A clamps, 24" fused ring leads with weather cap

Pair of Clamps, 100% copper jaws,

Automatic Charger/Maintainer. For all vehicles, can be mounted in the vehicle. Fully automatic with charging status indicated by LED. Reverse polarity and short circuit protection. Standard Master Carton contains 2 units, Voltage: 12V,

   Charge and maintain 6 and 12 Volt batteries
   Automatic operation with simple touch button control panel
   Compatible with multiple battery chemistries, including Conventional, AGM, Gel Cell and Spiral Wound
   Properly charges small or large batteries
   Smart Clamp Technology with Polarity Protection feature
   Sealed case keeps out moisture, dust and debris
   Includes battery clamps and battery ring connector

   Delivers a true 125 amp load and is calibrated to test batteries up to 1000 CCA
   Features an automatic testing routine for easy operation – simply press the "GO" button and the tester automatically runs a battery load test and provides a result
   It can be used to test 12 Volt batteries and charging systems
   1 Year Limited Warranty

   Manual Charging Mode
   50 amp clamp size
   Charging 6 Volt: 6
   Amps 12 Volt: 2/6

0.9 Amp, Slide switch for 6-12V setting

2 Gauge

   Tangle free design
   Extra heavy to commercial duty construction
   High/low temperature construction
   Heavy duty jaws
   Parrot clamp

   6 Amp Fast Charge – charger monitors battery condition and adjusts charge rate downward to prevent battery damage; for car, small truck, motorcycle, lawn tractor lead-acid and AGM batteries
   4 Amp Medium Charge – self-adjusting charge rate ideal for everyday charging needs and keeping your battery in peak condition
   2 Amp Slow Charge – for charging and maintaining small batteries; charges motorcycle, ATV, snowmobile and lawn tractor batteries
   6 Volt – for antique cars and small farm tractor batteries
   50 Amp Clamps – for top and side-mounted battery posts
   Electronic Push Button Controls – easy-to-feel switches for selection of Charge Rate or Battery Type
   Choose between 6 or 12 volt batteries
   Sturdy, Built-In Handle – serves as convenient cord wrap and for easy portability
   CUL Listed: Model SCF-600A

Schumacher SEC SP2 1A Extreme Charger/Maint.

   12 Volt Operation
   12 amp fast charge rate
   6 amp medium charge rate
   2 amp low charge rate
   Automatic operation
   Properly charges multiple battery types
   Smart clamp technology for ease and safety
   Polarity protection
   Soft start mode for deeply discharged batteries
   Digital display alerts to charging progress
   Unique, lightweight design
   Integrated cable management

   4 in 1 terminal cleaner
   Battery terminal 10MM ratchet
   Battery pliers
   Battery terminal 5/16 ratchet
   Battery terminal 5/16 ratchet extended
   Battery terminal lifter
   Battery terminal spreader /cleaner

2 Gauge

   Tangle free design
   Extra heavy to commercial duty construction
   High/low temperature construction
   Heavy duty jaws
   Parrot clamp

   Scrolling Messaging Display
   Automatically switches from Full Charge to Float-Mode Monitoring
   Quick-Connect Harness
   Reverse-hookup protection
   Auto Voltage Detection